Slot 0.5mm Johnson Wedge Wire Filter Screens Resin Traps High Efficient Stainless Steel

High Efficient Stainless Steel Slot 0.5mm Johnson Screens Resin Traps

Resin traps, also named as media traps, are designed to install on either existing and new build strainer bodies to capture the media and resins from loss and prevent them from traveling downstream.

The resin trap screen is normally with a flange on the head for easy installation to the equipment. The resin trap screen has a continuous and uniform slots to have a whole work face. It can be designed as the work direction flow in to out(FITO)or flow out to in(FOTI). The slot sizes are enough small to capture the tiny particle resins.

The resin traps are commonly made of stainless steel in order to avoid problems, such as rust corrosion.

Resin trap is a simple, protective sieving device to ensure ion exchange resin or other filtration media does not leave the water treatment equipment and travel downstream where it doesn't belong. Wedge wire screens (Vee wire screens) are installed near the outlet of the water system line and protected by mostly stainless steel housing or plastic housing.

When the resin or media passes by, it can be intercepted and captured by the wedge wire filter screens. At the same time, the captured resin can be discharged out of the system by flushing automatically through the differential pressure between front and rear.

Since the slots in the wedge wire are low to 20 microns and up to 3000 microns to suit different filtration fineness requirements.

Benefits of our resin traps include:

• Continuous-slot design provides an increased work surface
• Minimal pressure drop
• Strong and durable
• V-shaped surface wires allow for easy cleaning by back-flushing
• Stainless Steel is unrest and corrosion.

slot 0.5mm wedge wire filter

multifunctional wedge wire filter screen

high efficient sus wedge wire filter

Slot 0.5mm Johnson Wedge Wire Filter Screens Resin Traps High Efficient Stainless Steel Images